Signage · Laser cut · Orange County
Signs that
earn the wall.
CO2 laser cut acrylic, wood, and layered builds with edges polished until they glow. Reception walls, storefronts, studio doors, event pieces, and the odd award nobody expected to look this good.
- Flame polished edges
- Standoff mounted
- One offs to full runs
Send your logo and the wall. We come back with a price and a proof.
Cut, polished, and mounted in house
What makes a sign look expensive
The edge is
the whole tell.
- 01
Flame polished edges
A raw cut edge looks cheap and frosty. Ours come back glass clear so the sign catches light like a solid block.
- 02
Standoffs, not glue
Machined standoff bolts float the piece off the wall. The shadow behind it is doing half the work.
- 03
Cut from vector
We cut from real vector paths, so tight logo corners stay tight instead of going soft and rounded.
- 04
Layer for depth
Stack materials and colours to build a sign with genuine physical depth rather than a printed flat panel.
Pick your material
One logo.
Four personalities.
Material sets the tone before anyone reads a word. Clear reads modern, black reads premium, frosted reads soft, wood reads warm.
Clear acrylicAcrylic is not only signage. The same laser cuts standees, awards, ornaments, and keychains from the exact same file.
How it works
Logo in. Sign up.
- 1
Send logo and wall
Your artwork plus a photo of the space and a rough size. No vector file? We redraw it properly.
- 2
Approve the proof
We quote the job and send a proof showing material, size, and mounting. Nothing hits the laser until you sign off.
- 3
Mount it
It arrives cut, polished, and packed with the hardware and a drill template so it goes up straight.
Off the laser
Cut clean, polished sharp.
What a signage job includes
Laser cut signage
- ✓Your pick of material and finish
- ✓Vector cleanup or a full redraw
- ✓Flame polished edges
- ✓Standoff hardware and a drill template
- ✓A proof you approve before we cut
- ✓Layered builds for real depth
- ✓One offs, matched sets, or full runs
- ✓Packed so the corners arrive perfect
Priced from your brief. We are not the cheapest shop and we do not try to be.
Before you ask
Good
questions.
No. A laser needs vector paths, so we redraw your logo properly as part of the job. You get to approve the redraw before anything gets cut.
Yes. The same laser cuts standees, awards, ornaments, keychains, and layered multi material builds. If it is flat stock, it can be cut.
Most pieces go up on machined standoffs that float the sign off the wall. We ship the hardware and a drill template. Tape and slot mounts are options for lighter pieces.
Send us the wall and the logo and we will confirm what the bed can take in one piece. Larger pieces get cut in sections designed so the seams land where nobody looks.
From the brief. Material, size, cut complexity, layering, and quantity all move the number, so we quote the real job rather than guess at a list price.
